- All wetted parts are made of stainless steel, especially for applications with high demands on purity and surface quality
- Rough industrial applications possible thanks to robust aluminium housing
- Recommended for flammable gases such as natural gas, hydrogen, biogas, etc. thanks to ATEX + IECEx or DVGW approval
- Measurement of the mass flow, direct output of the standard volume flow
- Highly accurate for both small and large flow rates
- Pressure and temperature-compensated thanks to the thermal mass flow principle
- Quick and easy installation via a standard ½” ball valve
- No moving parts, therefore low maintenance
- Disappearingly low pressure loss, as the blockage of the diameter is negligible
- 04…20 mA, pulse and a Modbus RTU (RS 485) interface as standard, optional interfaces such as Modbus TCP (Ethernet), PoE, M-Bus
- Pressure range up to 50 bar, special version up to 100 bar
- Media temperature range up to 180 °C (ATEX + IECEx version up to 120 °C)
- Protection class IP 67 (IP 65 for ATEX + IECEx II 2D Ex tb IIIC T90°C Db)
- Integrated display to show the measured values
- Suitable as insertion version for 3/4″ to DN 1000
- Simple installation under pressure
- Settings can be adjusted using the buttons on the display
- Main counter reading can be reset via the display
- For speeds up to 224 Nm/s
- Highly accurate with an accuracy of ± 1.5% or ± 1% of the measured value – as well as ± 0.3 % of the final value
V.05
